CAT-10020AC

California Air Tools 2 Hp 10 Gallon Oil-Free Electric Air Compressor

Alternate Views:

Send to a friend

30% Off

On sale!

$760.00

$528.95

This item is in-stock and ready to ship!

Add to my wishlist

Add to cart

Order to ship lead time for this model is 1-3 business days,
even if Expedited Shipping is selected

More info

2 hp (Rated/Running)
10.0 Gallon (38 L) Lightweight (62 lbs) Rust-Free Aluminum Air Tank
6.40 cfm @ 40 psi
5.30 cfm @ 90 psi
Ultra Quiet.....Only 70 Decibels!
New heavy-duty SP Series motor designed to increase duty cycle and allow for longer continuous run time
Oil-Free, Dual Piston Pump is engineered for high performance and durability
Two Pressure Control Gauges
Two Universal 1/4" Hose Connectors
New heavy-duty Condor pressure switch
Assembled in the USA
1 Year Manufacturer Limited Warranty

CAT-10020AC | The California Air Tools 10020AC ultra quiet and oil-free air compressor is designed to be one of the quietest 2 hp air compressors in the industry emitting only 70 decibels of sound. The powerful 2 hp motor operates at only 1,680 rpm creating less noise, less vibration, and less wear. The oil-free dual piston pump system is engineered for longevity, high performance and durability. The new, heavy-duty SP Series motor (SP-9421) is designed for increased duty cycle and longer continuous run time. This motor is tested for a minimum pump life of 3,000+ hours before service, 25% more life before repair. The large 10 gallon lightweight, rust-free aluminum air tank with wheel kit makes it very easy to move around a job site, shop, or garage.

The Easy Start Valve feature allows for an easier start up using less starting Amps. This valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. The no-load start up requires less Amps for an easier start in cold temperatures.

The CAT-10020AC air compressor is ideal for anyone looking for power, air flow, less service, less maintenance, and 30% less noise!

Ships complete with (2) air filters, no special assembly or installation service required.

PDFs Specifications Operating Notes Decibel Levels

California Air Tools 10020AC Owners Manual

Output at 40 psi		6.40 cfm
Output at 90 psi		5.30 cfm
Maximum Pressure		125 psi
Air Inlet		1/4" (2)
Time To Fill Tank (Empty to Full)		120 seconds
Motor		2 Hp Electric (14.0 Amps)
Motor Speed		1,680 rpm
Voltage / Hertz		110 V / 60 Hz
Pump Type		Oil Free, Dual Piston
Decibel Level		70 dB
Tank Capacity		10 Gal (38L)
Weight		62 lbs
Dimensions		13" (L) x 15" (W) x 36" (H)
Manufacturer Limited Warranty		1 Year

TEST RUN

Before using the air compressor for the first time, complete a test run as follows:

Turn the power switch to the OFF position. Plug the power supply cord into a power supply socket. Start the air compressor by turning the power switch to the ON position. The pressure gauge reading will slowly rise as pressure increases inside the air tank. When the gauge reading reaches 115-120 PSI, the pressure switch will automatically turn the power off. This indicates the compressor is working normally.
Turn the power switch to the OFF position, unplug the power supply cord and release the air in the tank by pulling on the safety valve. At this point proceed to the next step (daily operation) starting the air compressor to continue to use.

Note: If the Air Compressor is not working properly, the pressure gauge will indicate that there is a decrease in pressure in the air tank. If there is an air leak from the compressor the pressure in the tank decreases, the pressure switch resets, and the motor automatically turns back on.

If you detect an air leakage, turn the power switch to the OFF position and release air from the tank by pulling on the safety valve. Unplug the power supply cord and contact California Air Tools Customer Service at (866) 409-4581.

DAILY OPERATION

Starting the compressor:

Turn the power switch to the OFF position
Attach the air hose to the 1/4" air hose connection
Close the drainage valve
Lift up and turn the regulator knob completely to the left. This will turn down the pressure at the air hose before starting
Plug the power supply cord into a power supply socket
Turn the power switch to the ON position
Let the motor run and tank fill until motor turns off
Turn the regulator knob to the right increasing the pressure at the hose. Turn the pressure up until the desired pressure at the air hose is reached
Operate air tool normally
Only operate continuously for 1 hour maximum. Allow compressor to cool down before restarting

Shutting down the compressor:

Turn the power switch to the OFF position
Unplug the power supply cord
Reduce the pressure in the air tank through the air supply hose

California Air Tools Air Compressor Decibel Level Chart

Cart

Categories

Professional Concrete and Masonry Tools

CAT-10020AC

California Air Tools 2 Hp 10 Gallon Oil-Free Electric Air Compressor

Send to a friend