JJ0200

JackJaw 200 3/4" and 7/8" Stake, Rod, and Post Puller

Alternate Views:

Send to a friend

$350.0000

$350.00

This item is not in-stock.
Call for delivery date.

More info

JackJaw Stake, Rod and Post Pullers

Pulls 3/4" and 7/8" diameter concrete form stakes, "T" posts, and string line stakes
Stake width / grip width: 3/16" to 1"
Pulls stakes straight up out of the ground, no bending!
Powerful all steel construction
Fast and easy extraction
Lightweight (22 lbs) and easy to use
Taller 29" frame height allows for pulling stakes without bending over
36" handle for maximum mechanical advantage
Eliminates dangerous, costly operations and bent, unusable stakes
Prevents damage to concrete
Positive grip prevents back, shoulder strain, and whiplash from slipping pullers
Made in the USA

JJ0200 | The JackJaw® 200 easily pulls 3/4" and 7/8" form stakes used in concrete applications, "T" posts, and string line stakes. This taller model (29") allows you to pull stakes without bending over.

JackJaw® stake extractors pull stakes straight up out of the ground without bending them or breaking the fresh concrete, even when the stake is flush with the top of the form. A 50 lb push on the handle generates a massive 1,050 lbs of gripping force and a 450 lb upward breakout force on the stake.

Contractors can now drive the top of the stakes below the top of the form, allowing them to finish the concrete faster by screeding over the top of the forms. With the low grip height of the JackJaw® 200 stake extractor, a contractor can easily pull up the stakes even when driven below the top of the form. This tremendous leverage prevents operator back injuries. Stake width / grip width range is 3/16" to 1".

PDFs Mechanical Advantage About JackJaw

JackJaw 200 Stake Puller Instruction Sheet

JackJaw® stake pullers provide the mechanical advantage needed to get the job done with minimal effort and no back strain. A 100 pound-force push down on the handle generates:

JackJaw Series	Mechanical Advantage	Gripping Force (lbf)	Upward Force (lbf)
100	9 to 1	1800	900
200	9 to 1	1800	900
300	16 to 1	3200	1600
400	12 to 1	2400	1200
500	28 to 1	5600	2800

MADE TO LAST

JackJaw® stake extractors are produced in Dayton, OH from heavy gauge steel plate and tubing to withstand everyday job site use. The gripping jaws of the JackJaw® puller are made from case hardened AR400 steel that will last for thousands of pulls. JackJaw® units have a zinc and clear chromate plating for long lasting durability and corrosion resistance. No paint to chip.

When it is necessary, the jaws are easily replaced in the field using common tools. Order jaw kit CA0010 for single bladed link arm models (100 Series, 200 Series), or jaw kit CA0006 for clevis link arm models (300 Series, 400 Series, 500 Series).

Cart

Categories

Professional Concrete and Masonry Tools

JJ0200

JackJaw 200 3/4" and 7/8" Stake, Rod, and Post Puller

Send to a friend